Condensate Pump Wiring To Furnace . If you have a condensing furnace you should wire it in to the 24v hot as to shut the whole system down if the condensate overflows. Diversitech condensate pump wiring diagram : Aspen Condensate Pump Wiring Diagram from wiringall.com Condensate pump wiring in either case, the outlet should be on a dedicated circuit. Usually the y wire going outside. The high efficiency furnace condensate drain is required to release outside the home properly.
Refco Combi Condensate Pump Installation. Gobi ii & combi at full power 60 50 40 30 20 10 0 vertical lift / head pressure ft. View and download refco combi instruction manual online.
Refco Combi Condensate Pump 42l/Hr from Reece from www.actrol.com.au
The refco condensate pump cables should not be cut, and should be routed so that they cannot be damaged during and after installation. The combi is full of custom features that are unique to the world market. 100 ~ 240 vac 50/60 hz auto sensing universal power input.
Alarm Fuse Has Been Burned.
Standby waiting for water 1 sec green (off) 1. Lf this is damaged the entire pump must be replaced. Contact refco for a replacement.
The Combi I S Full Of Custom Features That Are Unique To The World Market.
The combi is designed for large pumping requirements and is suitable for systems from 6,000 btu/h (1.75kw) up to 120,000. The refco condensate pump cables should not be cut, and should be routed so that they cannot be damaged during and after installation. The combi condensate pump is to be installed in accordance with local and regional electrical codes.
The Combi Is Full Of Custom Features That Are Unique To The World Market.
The combi condensate pump is to be installed in accordance with local and regional electrical codes. The flow range, optional configuration and universal voltage allow both installing contractors and wholesalers. Gobi ii & combi at full power 60 50 40 30 20 10 0 vertical lift / head pressure ft.
The Combi Is Full Of Custom Features That Are Unique To The World Market.
The flow range, optional configuration and universal voltage allow both installing contractors and wholesalers to stock and use a. The combi condensate pump is designed for systems from 6.000 btu/h (1.75kw) up to 120.000 btu/h (35kw). The flow range, optional configuration and universal voltage allow both.
The Refco Condensate Pump Cables Should Not Be Cut, And Should Be Routed So That They Cannot Be.
Power up led sequence 1 sec red/green (off) 1 sec red/green (off) 1 sec red/green alternating red/ green flashes 5x only then stop and go to standby (default relay operation). $54.5,the combi condensate removal pump is a great option for optimum condensate removal. The combi condensate pump is designed for systems from 6 000 btu/h (1.75kw) up to 120 000 btu/h (35kw).
Comments
Post a Comment